1 78 Hammer Wrench

Bestseller No. 1
Stanley J2630SW Heavy Duty 12 Point Offset Striking Wrench 1-7/8 Inch
  • Black oxide finish
  • Large striking surface for surer blow contact and more efficient transmittal of force to fastener.
  • For use where extreme force is necessary to loosen or set large fasteners.
  • Offset handle clears obstructions.
  • Heavy box walls provide greater torque transmission., Made in USA
Bestseller No. 2
Sunex 9707A SAE Raised Panel Jumbo Combination Wrench Set, 1-5/16-Inch - 2-Inch, Fully Polished, 7-Piece (Includes Roll-Case)
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
SaleBestseller No. 3
Channellock WS-2 Adjustable Wrench Set, Chrome, 2-Piece
  • Set Includes: 6" & 10" Wide Adj Wrench
  • Greater jaw capacity supports larger nuts and bolts
  • Longer jaws grip better, Thinner jaws give greater access in tight spaces.
  • Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
  • 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
Bestseller No. 4
OrionMotorTech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
  • ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation. Easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle.
  • INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
  • ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
  • UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
  • PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.
Bestseller No. 5
Ecloud Shopus R7s 60 3014 SMD Warm White LED Light Lamp Bulb 6w 78mm Ac 100-240v
  • LED. Not as in LED Zeppelin the musical phenom since forever.
  • But LED lights. Bright without giving off heat. For your home or office. This means energy savings which is another way to describe money savings.
  • So you have lots of money left over to go see a picture show. Make take your sweetheart. Box of popped corn and fizzy soda.
  • This particular LED bulb comes with a R7, 79mm base and packs a wallop of brightness at 600 lumens.
  • It's got 60 individual 3014 SMD chips on it for color temperature 3000K, warm white like the aura surrounding someone you love. Pick up a bunch today.
Bestseller No. 6
uxcell Drill Chucks, 1/2-20UNF Threaded 1.5-13mm Capacity Square Shank with Chuck Key for Electric Impact Corded Cordless Drill
  • [SIZE] - Clamping Range: 1.5-13mm, Mounting Thread: 1/2-20UNF
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package)
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value
Bestseller No. 7
OTC (1205) Universal Puller for Wet-Type Sleeves
  • This tool will remove cylinder sleeves faster than ordinary pullers because it requires very little setup time
  • Cone adjustment positions the puller jaws quickly locking bar is tightened
  • With a few sharp hammer blows sleeve is pulled
  • In most cases job time will average less than two minutes per cylinder
  • The puller features a 5 pounds slide hammer to help bust loose even the most stubborn sleeves
Bestseller No. 8
WickedGoodz AR15 Decal, Gun Bumper Sticker, Second Amendment Gift
  • PREMIUM VINYL Die Cut 4.7 x 3.3 inch AR-15 decal proudly Made in the USA
  • Perfect for cars, trucks, laptops, lockers, scrapbooks, windows, walls, bumpers, or any other smooth surfaces.
  • WEATHER RESISTANT 3M vinyl will last long and never fade.
  • Easily applied on any smooth surface, peel and stick
  • HAND DESIGNED and makes a UNIQUE Gift by WickedGoodz
SaleBestseller No. 9
78 Pieces Kids Workbench with Realistic Tools and Electric Drill for Construction Workshop Tool Bench, STEM Educational Play, Pretend Play, Birthday Gifts and Tool Bench Building Set by JOYIN
  • Construction Workshop Tool Bench includes Set-up Workbench, Hammers, Screwdrivers, Measuring Squares, Hand Saws, Electric Drill, Nuts, Screws, Adjustable Wrench, Circular Saw, Nippers, Wrench, Sliding Scale and more.
  • Best Quality Tools Toys. Lightweight & Easily Portable. Bright Colors. Made with None-Toxic Environmental Friendly Plastics. Premium Quality. Set size: 34” H X 27 ½” W X 11” L
  • Educational Creative Indoor-Outdoor Toys Tool Set: IDEAL for Toddler Preschool Early Training. Including Body Coordination, Operational Practice, Color Sorting, Building Construction.
  • Super Value Toy Pack for Christmas Gift. Perfect for Pretend Paly, Work Bench Pouching, Screw Driver Playing, Education Center, Eye-hand Coordination, As Seen on TV, School Classroom, Holiday Toy Gifts, Christmas Gifts and More!!! Create Hours of Fun Playtime.
  • CHILD SAFETY: Meet US Toy Standard. Safety Test Approved. Non-Toxic.
SaleBestseller No. 10
Woodraphic Precision Square 8-inch Guaranteed T Speed Measurements Ruler for Measuring and Marking Woodworking Carpenters - Aluminum Steel Framing Professional Carpentry Use
  • MARK WITH PRECISION AND GET THE ‘RIGHT’ RIGHT ANGLE - WOODRAPHIC’s Ruler gives you the ultimate marking precision, allowing the user to precisely mark up to the finest millimeter, which is about 0.039 inches. Also, this aluminum 90 square tools earned its square accuracy from Internationally accredited organizations. WOODRAPHIC’s ruler was certified level 1 in Japanese Industrial Standards (JIS). So not only are you able to mark the exact length, but also check the perfect right angle
  • CHOOSE THE RIGHT SIZED RULER FOR YOUR PROJECT - The conventional square ruler’s signature feature is to establish perfect 90-degree angles. However, with WOODRAPHIC’s equipment, you can also measure diameter from the inside or the outside. WOODRAPHIC’s square ruler comes in a variety of sizes ranging from 8”, 12”, 100mm, 200mm, 300mm. WOODRAPHIC’s professional square ruler is perfect for marking cut off work on wide stock and verifying 90 degrees of the products as well
  • EASY-TO-READ THERMAL - Each aluminum blade is precisely milled with state-of-the-art MCT equipment followed by sanding procedure and anodizing finishing touches. WOODRAPHIC’s professional square ruler is constructed for maximum durability. Blades are engraved with laser marks on the scale with white markings on black smooth backgrounds for increased readability
  • THE 3-CARPENTER MUSKETEERS - WOODRAPHIC’s construction accessory comes with a square, 0.5mm sharp pencil. Each blade has a layout of 2-holes on the handle surface, promising enhanced precision. You can conveniently mark lengths, diameters, and dimensions by inserting the 0.5mm sharp pencil lead through the marking hole. Accurate positioning is possible by marking the holes arranged in two rows
  • STABLE YET LIGHTWEIGHT - 90-degree blade is made with the anodized aluminum material with 2mm thickness. This stable cast aluminum tool plate is sturdy yet surprisingly lightweight. If you are a professional who uses square rulers all day, you can tell the difference right away. The lightweight body is ergonomically designed to ease the pressure on the elbows or wrists while measuring and marking

Compare The Top 10 1 78 Hammer Wrench

1 78 Hammer Wrench is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page